Table of Contents
Advertisement
32
en | Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts
CAUTION!
If you feel any resistance when rotating the dome housing or when engaging the connector,
stop immediately and start over.
4.
CAUTION!
You must tighten the two mounting screws to a minimum torque of 10-12 N-m (90-105 in.-lbs)
to ensure a proper seal between the arm and the housing.
F.01U.273.797 | 5.0 | 2012.08
Hold the Pendant housing in position while tightening the two (2) 5-mm Allen head
mounting screws on top of the housing to 10-12 N-m (90-105 in.-lbs).
Installation Manual
AutoDome 800 Series HD PTZ Camera
Bosch Security Systems, Inc.
Advertisement
Table of Contents
