NEC Express5800 320La User Manual page 119

4. Determine the slot location on the PCI module board where you want to
install the PCI adapter board and remove the connector cap. See Figure 4-40.
Note:
Save the connector cap removed from the PCI
board slot for future use.
Figure 4-41. Removing the PCI Slot Connector Cap
5. Remove the PCI board from its protective wrapper, holding the board only
by its edges. Do not touch the board components or its connectors.
Note:
Observe static precautions. Use an antistatic
wrist strap.
6. Set any board jumpers or switches as described in the documentation that
comes with the PCI board.
7. Unscrew the setscrew and remove the PCI expansion slot cover, see Figure
4-42.
Note:
Save the PCI expansion slot cover for future use.
Figure 4-42. Removing the PCI Expansion Slot Cover
CRU Replacement and Server Upgrades 4-33