System Hardware Menu - NEC Express5800 320La User Manual

System Hardware Menu

Feature
Thermal Sensor
Wake On Events
AC Link
Error Log
Initialization
Console
Redirection
State Before Power Off
In Service
Out of Service (DC Power Off)
Forced Shutdown*
*Pressing the Power switch for at least 4 seconds shuts down power to the server.
Choices or
Display Only Description
Refer to Thermal Sensor
Submenu.
Refer to Wake On Events
Submenu.
Power On Determines the mode of AC
Last State
Link. This determines the state
Stay Off of the server when AC power
is reapplied (see Table below).
Note: When "Wake On LAN" is
enabled, Stay Off is the only
choice for selection.
Press Enter Request to initialize the
System Error Log now.
If Clear OK, then display
"System Event Log Cleared!"
If Clear NG, then display
"System Event Log Not
Cleared!"
Additional setup menus to
configure console.
The Boot-time diagnostic
screen is enabled if redirection
is enabled.
Server Power State Versus AC Link Settings
Stay Off
Setting
Last State
Off On
Off Off
Off Off
Configuring Your System 3-13
Your Setting
Power On
On
On
On