NEC Express5800 320La User Manual page 135

8. Secure the power supply by pushing its locking handle up to its fully locked
position until you hear it click and then fasten with the screw removed in
step 4 above. See Figure 4-60 and Figure 4-58.
Incorrect
Figure 4-60. Installing the Power Supply
9. Plug one end of the power cord into the AC input receptacle on the rear of
the power supply (see Figure 4-61) and connect the other end into the AC
wall outlets. Verify that the power supply is operating correctly by checking
that its leftmost status indicator (Power) is lit green and its other two status
indicators are off.
Figure 4-61. Connecting the AC Power Cord
2
1
Correct
CRU Replacement and Server Upgrades 4-49