Table of Contents
Advertisement
7–4
Using Fonts
INSTALLING
SUPERSCRIPT
TRUETYPE
FONTS
There are 20 additional TrueType fonts bundled with
your SuperScript 660plus printer. If you did not
install them when you installed the SuperScript
software, follow these instructions to install them
now.
These 20 additional TrueType fonts are located on
SuperScript Software Disk #3 and #4.
1. In the Control Panel Window, choose the Fonts
icon. The Fonts dialog box appears.
2. Choose the Add button. The Add Fonts dialog
box appears.
3. Open the drive list by clicking the arrow next to
the box, and select the drive that contains the
NEC SuperScript Software Disk #3.
4. Select the /TTFONTS directory from the directo-
ries list. The fonts on the NEC SuperScript
Software Disk #3 in the /TTFONTS directory
appear in the List of Fonts box.
5. Select the fonts you wish to install in the List of
Fonts box or choose the Select All button to
install all the fonts. You can add multiple fonts at
one time by holding down the Control button on
your keyboard while selecting additional fonts
with the mouse.
6. Choose the OK button to add the selected font(s).
The font dialog box appears.
7. Choose the Close button.
Advertisement
Table of Contents
