Table of Contents
Advertisement
Printing with Your SuperScript 610plus
Create an Overlay File
1. Open the Windows Control Panel and then
choose the Printers icon. Check to be sure the
printer selected is the SuperScript 610plus GDI.
2. Click on the Setup Button to open the
SuperScript GDI Setup screen.
3. Click on the Options button to open the Ad-
vanced Options screen.
4. Click on the Print to File checkbox. The default
file name is C:\SSCRIPT\DEFAULT.GDI. This
can be changed by typing in the desired name
provided the extension remains .GDI.
5. Select OK for each screen and close Control
Panel.
6. Using your application, create or open the
document to use as the Overlay.
NOTE: If you are creating a file to be used as a color
overlay, make sure the image is defined as black. If
you create the image as a color image, when it is
printed if will produce a dithered output and not
produce a solid color.
7. Print the image. It will create a file rather than
actually outputting to the printer.
8. Close the application and go back through
Control Panel to the Advanced Options screen
and click on the Print to File checkbox to de-
select it.
3–17
Advertisement
Table of Contents
