2–32
Setting Up
6. You will be prompted to choose either the 50-
sheet hopper or 200-sheet hopper. Unless you
have purchased the optional 200-sheet hopper,
select the standard 50-sheet hopper and click
continue. If you add the 200-sheet hopper, you
will need to reinstall this software.
7. Tell the setup program which parallel port you
wish to use: LPT1, LPT2, or LPT3. The setup
program only shows you the port names avail-
able on your system. The default is LPT1.
Later, after the installation, you can select a
different port by using the NEC SuperScript
Print Status Window (see Chapter 5).