Manual Duplex
Printing
Printing with Your SuperScript 610plus
If you put an X in the box marked Manual
Duplexing, NEC SuperScript, with a little help from
you, will print your file on both sides of the paper.
You can also choose one of two formatting options:
• Book Style prints out so that if you open the
document in the manner of a book, pages 2 and
3 would face each other.
• Report Style prints the even-numbered pages
upside down, so that if you open the document
in the manner of a report bound at the top,
pages 2 and 3 would face the same way.
You can also put an X in the box marked Print
Instructions. If you do this, then the
Silentwriter SuperScript printer will print out
detailed instructions every time you print in
manual duplex mode.
Here's how double-sided printing works.
Using the Standard Hopper
1. SuperScript prints every odd-numbered page of
your document, starting with the last odd-
numbered page.
2. Pick up the printed sheets of paper, straighten*
them, then reinsert them one by one into the
Silentwriter SuperScript printer, starting at the
beginning of the document. The reinserting
directions are as follows.
3–9