Table of Contents
Advertisement
Interface Cable Specifications
- PC Side: EIA 25-pin connector
Example
HIROSE ELECTRIC CO., LTD. HDBB-
25P or equivalent
* All dimensions are shown in inches and are
included for reference only.
4. Cable
- The connecting cable shall be shielded .
- Each signal and ground pair shall be twisted.
NEC has tested and has had acceptable results using
CURTIS IBM PC,PS/2 Parallel Printer Cable, part #
EC-6. CURTIS Manufacturing Company, Inc is
located at 30 Fitzgerald Drive, Jaffrey, NH 03452.
NOTE: NEC does not warrant the use of any particu-
lar cable and the user assumes all responsibility as to
the quality and performance of the cable.
D–3
Advertisement
Table of Contents
