Windows; Installing Superscript 4400 Printer Drivers; Tcp/Ip Requirements For Windows Configuration78; Network Configuration Options - NEC 4400 - SuperScript Color Laser Printer User Manual

W
INDOWS
There are several ways you can configure your Windows
workstation to access the 4400 network printer, depending on
which version of Windows you are using and your system
configuration. Below, under "Network Configuration
Options," are possible scenarios.

Installing SuperScript 4400 Printer Drivers

As you configure your network operating system, you will
need to install a copy of the SuperScript 4400 printer driver
onto each workstation that will be accessing the network
printer.
TCP/IP Requirements for Windows
Configuration
TCP/IP is required for Windows 95/98, Windows NT 4.0 and
Windows for Workgroups, if you want to access and use the
Network Administration Page to view printer status and
manage network printers. TCP/IP is also required to operate
the printer in an IP protocol network (such as for peer to peer
printing). TCP/IP setup for Windows 95/98 and
Windows NT 4.0 is explained on page 79.
78 SuperScript 4400 Series — User's Guide
Network Configuration Options

Windows 95/98

• If you have a NetWare network, see page 84 for
NetWare 4.x setup, or page 86 for Netware 3.x setup.
• If you have no network server, you can print directly to
the network printer using the peer to peer software
provided on the SuperScript 4400 Series CD. See page 80.
• You can also set up shared printing (see page 82).
Windows NT 4.0
• If you have a NetWare network, see page 84 for
NetWare 4.x setup, or page 86 for Netware 3.x setup.
• In a Windows NT network you can use lpr printing. See
page 81.
Windows for Workgroups
• If you have a NetWare network, see page 84 for
NetWare 4.x setup, or page 86 for Netware 3.x setup. You
can also use shared printing.