System Network Services - Intermec PM23c User Manual

Appendix B — Default Settings

System Network Services

142
System I/O Settings
Setting Description
Wireless 802.11 Determines if the printer is allowed to
communicate using its 802.11 radio.
Supported only if the optional
Wi-Fi+Bluetooth module is installed.
Bluetooth Determines if the printer is allowed to
communicate using its Bluetooth radio.
Supported only if the optional
Wi-Fi+Bluetooth module is installed.
RFID Determines if the printer is allowed to
communicate using its RFID radio. Supported
only if the RFID module is installed.
Virtual COM Determines if you can enable the USB port to
be used as a virtual serial port.
This section lists the network services you can manage from the
printer. You will only see Manage Services from the menus if you have
an Ethernet or Wireless module installed in the printer. To view these
services:
• From the printer Main Menu, select Settings > System Settings >
Manage Services.
• From the printer web page, click the Configure tab, System
Settings > Manage Services.
System Network Services
Service Description
Web Server Determines if the web server is enabled in the
printer.
FTP Determines if the printer can use File Transfer
Protocol (FTP).
Avalanche Determines if the printer can be managed by
Wavelink Avalanche.
Net1 Determines if the printer can use Telnet to
communicate with Fingerprint.
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Default
Enable
Enable
Enable
Disable
Default
Enable
Enable
Enable
Enable