Intermec PM23c User Manual page 35

PM23c, PM43, and PM43c Mid-Range Printer User Manual
PM23c, PM43, and PM43c Options and Accessories (Continued)
Option or Accessory
DUART Board
Extended Base with
Full Label Roll
Rewinder
Industrial
Interface+UART
board
Label Dispenser with
Rewinder and Label
Taken Sensor
Label Taken Sensor
Large Edge Guide
Media Cover Lock
Parallel IEEE 1284
Interface board
Real Time Clock
RFID Module
Supported
Printer Description
PM23c, Use the DUART board to add two
PM43, UART ports on the back of the printer.
PM43c
PM43 Use the extended base option with the
PM43 printer to be able to rewind a
full roll of labels.
PM23c, Use the Industrial interface + UART
PM43, board to make a UART port on the
PM43c back of the printer.
PM23c, Use the label dispenser to peel labels
PM43, from the backing and present the
PM43c labels one at a time for application.
PM23c, Use the label taken sensor with the
PM43, label dispenser option to detect when
PM43c labels are removed from the printer
and another can be printed.
PM43 Use the large edge guide to make sure
that large rolls of media stay on the
hanger.
PM43 Use the media cover lock on the PM43
to make sure the media cover remains
closed with an external lock.
PM23c, Use the parallel interface board to
PM43, make a parallel port on the back of the
PM43c printer.
PM23c, Use the real time clock to keep track of
PM43, the current time on the printer.
PM43c
PM23c, Use the RFID module to be able to
PM43, print on RFID media. The PM23c can
PM43c print RFID baggage tags.
Chapter 1 — About the Printer
21