Table of Contents
Advertisement
Chapter 7: Upgrading Your Computer
Adding or replacing a hard drive
Use these instructions to add or replace a hard drive.
To add or replace a hard drive:
1
Open the case using the instructions in
2
If you are adding a drive, locate an empty drive bay.
-OR-
If you are replacing a drive, disconnect the drive cables, noting their
locations and orientation. (You will reconnect the cables after you install
the new drive.) See the drive documentation for further instructions.
100
"Opening the case" on page
Data ribbon cable
www.gateway.com
Power cable
92.
Advertisement
Table of Contents
Troubleshooting
