Chapter 7: Upgrading Your Computer
7
Slide the new system board into the keyhole slots and lock it into place
with the thumbscrew.
Important
8
Reconnect the power and data cables using your notes from
the system board documentation for more information.
9
Reinstall the add-in cards using the instructions in
add-in cards" on page
10
Close the case using the instructions in
114
The new system board must have special standoffs
(pem studs) mounted on the bottom of the board. If
necessary, use the standoffs from the original system
board.
103.
www.gateway.com
"Adding or replacing
"Closing the case" on page
Step
4. See
95.