System Board Specifications - Gateway E-6100 User Manual

System board specifications

The following specifications are for the standard configuration. Your system
may contain optional equipment. All specifications are subject to change
without notice or obligation.
Form factor
Processor
Memory
Chipset
Video
USB
LBA
Peripheral interfaces
Expansion capabilities
I/O Control
LAN
ATX Form factor - 11.52 × 9.6 inches (292.61 × 243.84 mm)
®
Support for an Intel Pentium
■
socket with a 400/533/800-MHz system bus
Support for an Intel Celeron
■
socket with a 400-MHz system bus
Four 184-pin DDR SDRAM DIMM sockets
■
Support for DDR 400, DDR 333, and DDR 266
■
Support for as much as 4 GB of system memory
■
Intel 875P Chipset, consisting of:
Intel 82875P Memory Controller Hub (MCH)
■
Intel 82801ER I/O Controller Hub (ICH5-R)
■
Intel 82802AC (8Mbit) Firmware Hub (FWH)
■
Universal 0.8/1.5-V AGP 3.0 connector (with integrated
retention mechanism) supporting 1X, 4X, and 8X AGP cards
Support for USB 2.0 devices
Support for 48-bit Logical Block Addressing (LBA)
Eight USB ports
■
One serial port
■
One parallel port
■
Two serial ATA IDE interfaces
■
Two parallel ATA IDE interfaces with UDMA 33, ATA-66/100
■
support
One diskette drive interface
■
PS/2 keyboard and mouse ports
■
Five PCI bus add-in card connectors
LPC Bus I/O controller
Intel 82547EI Platform LAN Connect (PLC) device for Gigabit
(10/100/1000 Mbps) Ethernet LAN connectivity
www.gateway.com
System board specifications
®
processor in an mPGA478
®
processor in an mPGA478
161