Replacing the system board
To replace the system board:
1
Open the case using the instructions in
2
For more stability, place your computer on its side. Place your computer
on a towel or other non-abrasive surface to avoid scratching the
computer case.
3
Remove all of the add-in cards using the instructions in
replacing add-in cards" on page
4
Disconnect the power and data cables from the system board, noting their
locations and orientation. (You will reconnect the cables after you install
the new board.)
"Opening the case" on page
103.
www.gateway.com
Replacing the system board
92.
"Adding or
111