7.1 Overview
The NBG is set to router mode by default. Routers are used to connect the local network to another
network (for example, the Internet). In the figure below, the NBG connects the local network
(LAN1 ~ LAN4) to the Internet.
Figure 41 NBG Network
Note: The Status screen is shown after changing to the Expert mode of the Web
Configurator. It varies depending on the device mode of your NBG.
7.2 What You Can Do
Use the Status screen
7.3 Status Screen
Click
to open the status screen.
Router
(Section 7.3 on page
NBG6503 User's Guide
55
C
H A PT ER
Router Mode
Modem
55) to view read-only information about your NBG.
7