Table of Contents
Advertisement
CS14 & CSN14 Series Converter Switches Installation and User Guide (09/09)
4.0
OPERATION
4.1 Dual-Speed Functionality, and Switching
The Magnum CS14 & CSN14 Series Converter Switches provide four switched
ports(three ports in the front and one on the rear). The architecture supports a dual speed
switching environment, with auto-negotiation capability.
The switched RJ-45 ports are full-duplex and auto-sensing for speed. (See section
2.2). When the connected device is 10 Mbps, the CS14s obeys all the rules of 10 Mbps
Ethernet configurations. The 10 Mbps users share a 10 Mbps traffic domain, and can
"communicate with" 100Mbps users as well as 100Mbps domain. Similarly, the 100Mbps
traffic obeys the rules of 100Mbps Ethernet, and can communicate with 10 Mb domain too.
Magnum CS14 & CSN14 Series units are plug-and-play devices. There is no
software configuring to be done at installation or for maintenance. The only hardware
configuration settings is user options for port#2, to configure at FF/AN and can be done
through a manual switch accessed from the front side. The internal functions of both are
described below.
www GarrettCom com
.
.
50
Advertisement
Table of Contents
