Remote Span; Service Groups; Tcam Threshold Based Alarms - Cisco ASR 903 Release Notes

New Software Features in Cisco IOS XE Release 3.11S

Remote SPAN

This feature is used for remote monitoring of multiple devices at source port, source Vlan levels in the
Layer2 network. For more information, see
http://www.cisco.com/en/US/docs/routers/asr903/software/guide/b_layer2_ASR903_chapter_01.html

Service Groups

The Service groups feature allows you to create service groups and apply aggregate features to those
service groups.
For more information, see
http://www.cisco.com/en/US/docs/routers/asr903/software/guide/b_QoS_guidelines_903_chapter_00.h
tml

TCAM Threshold Based Alarms

This feature generates syslog and consequently a Simple Network Management Protocol (SNMP) trap
when an application reaches the preset threshold for its allotted TCAM size.
For more information, see
http://www.cisco.com/en/US/docs/routers/asr903/software/guide/b_TCAM_alarms_ASR903.html.
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
4
Chapter
OL-26630-08