Disk Operations - Panasonic CF-Y2 Series Reference Manual

Dealing with Problems (Advanced)
Connecting Peripherals
The RAM module has not been
recognized
The address map for IRQ, I/O port
address, etc. is unclear
The following phenomena occur
The LAN transmission speed slows
down dramatically
Wireless LAN connection drops out
Poor performance when forwarding
data via a PC card (e.g., unstable
video images when writing videos
to a DV camera using an IEEE1394
PC card)

Disk Operations

Cannot read/write to a floppy disk
Unable to write to a disk
Make sure the RAM module has been properly inserted.
Use the RAM module that supports the recommended specifications (⇒
Operating Instructions "RAM Module").
The current address map can be displayed with the following procedure.
[start] - [Control Panel] - [Performance and Maintenance] - [System] -
[Hardware] - [Device Manager] - [View] - [Resources by type].
These phenomena may be consequences of performance losses that result
from CPU power-saving functions. Execute the following operations after
logging on with administrator authority.
A
Input [c:\util\cpupower\setup.exe] in [start] - [Run], and select [OK].
Follow the on-screen instructions.
B
Select [Performance] in [start] - [Panasonic] - [CPU Idle Setting] and
select [OK], then select [Yes].
The computer will be restarted automatically.
If these phenomena occur even with the above settings, select
[start] - [Control Panel] - [Performance and Maintenance] - [Power
Options] - [Power Schemes], select [Always On] from [Power
schemes], and select [OK].
• These operations will be helpful in easing the performance losses resulting
from CPU power saving functions, but will not be effective against the
phenomena resulting from other causes. (e.g., noise generated during
periods of exceptionally high load on the CPU, such as during video
playback).
• When these operations are performed, the battery running time will be
reduced to some extent. We thus recommend that when these phenomena
do not occur, you should select [Battery (Windows XP Standard)] in [CPU Idle
Setting], and return [Power schemes] in [Power Options] to [Portable/Laptop].
Are you using the Panasonic CF-VFDU03 USB floppy disk drive (optional)?
Has the floppy disk been correctly inserted?
Has the floppy disk been correctly formatted?
Your floppy disk content may be corrupted.
Is the floppy disk write-protected?
120