Panasonic CF-Y2 Series Reference Manual page 79

External Display
Precautions
At the confirmation message, select [OK].
NOTE
There are some applications that cannot be used in the Extended Desktop.
When the button to maximize a window is pressed, one of the displays will show the
maximized display.
A window that has been maximized cannot be moved to the other display.
You cannot switch the display destination by pressing Fn+F3.
When the Extended Desktop is being utilized;
• The pop-up window displayed by Fn key combination is shown only on the primary
device.
When changing the primary device ([1]) and secondary device ([2]), be sure to
change them in the following menu. If you use other procedures, the window may not
be displayed properly.
Select [start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Extreme
*1
Graphics 2 M] - [Devices] - [Extended Desktop]
*1
CF-W2 series: [Intel(R) Extreme Graphics]
When the application running is not shown on the display, refer
to the following items.
Under the condition the application is in the external display, or after the application is
closed in the external display, there are cases the application will not be shown in the
display when executed the next time if the position of the extended display is changed or
the Extended Desktop is closed.
When there is no display after the position of the extended display is changed:
The application running is being displayed at the position of the extended display before
the change. Return the position of the extended display to the condition before the
change. Move the application to the internal LCD, and then correct the position of the
extended display.
79