Battery Power - Panasonic CF-Y2 Series Reference Manual

Battery Power

Use the Battery Indicator to Check the Battery Status
For using the battery pack, select
Important Tips provides information on how to maximize use of the battery pack, which is
necessary for computing away from your home or office. You can also view [Important Tips]
using the following procedures.
Select [Important Tips] in [start] - [All Programs] - [Panasonic] - [On-Line Manuals].
Battery Indicator
Not lit
*1
Orange
*1
Green
Red
*1
Blinking red
*1
Blinking orange
*1
When the AC adaptor is connected.
to view [Important Tips].
Battery Status
Battery pack is not connected or charging not being
performed.
Charging in progress.
Fully-charged.
The battery level is very low (the charge is approx. 9% or
less).
Connect the AC adaptor. You can use the computer when
the battery indicator light is orange. If you do not have an AC
adaptor, save your data and power off your computer. After
replacing the battery pack with a fully charged one, turn your
computer on.
Battery pack or charging may not be working properly.
Quickly save your data and power off your computer.
Remove the battery pack and disconnect the AC adaptor,
then connect them again. If the problem persists, contact
your technical support office. Possible failure in the battery
pack or charging circuit.
Battery cannot be recharged temporarily because the internal
temperature of the battery pack is outside of the acceptable
temperature range for recharging. Once the allowable range
requirement is satisfied, charging begins automatically. Your
computer can be used normally in this state.
34