Panasonic CF-Y2 Series Reference Manual page 72

SD Memory Card Security Function
setting of [SD Setting Method] in [Security] menu after completing the SD Card
Setup. ( page 102)
6
Make the settings according to the case to be used.
To use when starting the computer
An SD memory card will be registered with the computer. (Up to two cards can be
registered.)
A
Add the check mark for [Use when starting computer] (B) and select [Next].
B
Select [Restart the computer after entering settings], then select [Finish].
C Enter the Supervisor Password.
If the Supervisor Password has been set
Enter the Supervisor Password, then select [OK].
If the Supervisor Password has not been set
Follow the on-screen instructions to set the Supervisor Password.
Enter the Supervisor Password, then press Tab.
Reenter the Supervisor Password for confirmation, then select [OK].
Select [Yes] on the confirmation screen.
[Supervisor Password] and [Password on boot] will be set to enable.
To use when logging on to Windows
The Windows logon user name and password set in [Control Panel] are registered
in the SD memory card.
After making this setting, the following functions will be disabled.
Displaying the Welcome screen
The Fast User Switching function
Remote desktop connection
A Add the check mark for [Use when logging on to Windows] (C) and select
[Next].
B
Select [Restart the computer after entering settings], then select [Finish].
C Set the Windows logon user name and password.
Enter the user name, then press Tab.
Enter the password, then press Tab.
72