Using The Display; Resuming Operation - Panasonic CF-Y2 Series Reference Manual

Standby/Hibernation Functions

Using the Display

Resuming Operation

release it, a second beep
not previously saved will be lost.
*1
When the speaker function is disabled, e.g., by the key combination
sound.
Setting
1
Select [start] - [Control Panel] - [Performance and Maintenance] -
[Power Options] - [Advanced].
2
Select [Stand by] or [Hibernate] for [When I close the lid of my
portable computer], and then select [OK].
Entering the standby or hibernation mode
1
Close the display.
The computer will enter either the standby or hibernation mode, depending on the
setting.
When entering the standby or hibernation mode, close the display correctly. If
you do not do so, (for example, if you open the display soon after you close it)
the computer may not enter standby or hibernation mode.
CAUTION
Until resuming is complete (requires about 15 seconds, or 60 seconds if connected to
a network, after the display returns), avoid the following:
• Touching the keyboard (except for password input), touch pad, or power switch.
• Using external mouse or other peripheral devices.
• Connecting or disconnecting the AC adaptor.
• Closing or opening the display.
*1
will sound and the power will be turned off forcibly. Data
22
Fn F4
+ , there will be no beep