Panasonic CF-Y2 Series Reference Manual page 15

Touch Pad
Using the Virtual Scrolling Function
NOTE
Because the Touch Pad utility and the Virtual Scrolling function both offer scrolling
functions that use the touch pad, these two features cannot be used simultaneously. If
you try to use them at the same time, a message may be displayed asking you if you
want to enable the Touch Pad utility.
• To use the Touch Pad utility:
Select [Yes]. The Virtual Scrolling function will be disabled.
• To use the Virtual Scrolling function:
Select [No], and then remove the Touch Pad utility and set the Virtual Scrolling
function using the following procedure. In this case, the Touch Pad utility will be
disabled.
1
Log on with the administrator authority.
Do not use the Fast User Switching function.
2
Select on the taskbar with the right button, and select [Exit].
If is not displayed on the taskbar:
In [start] - [All Programs] - [Panasonic] - [Touch Pad utility settings] - [General
settings], add a check mark for [Display icon in task tray] and select [OK].
3
In [start] - [Control Panel] - [Add or Remove Programs], select
[TouchPadUtility], then select [Change/Remove].
4
At the confirmation message, select [OK], then select [Finish].
5
Select at [Add or Remove Programs].
6
Select [start] - [Control Panel] - [Printers and Other Hardware] -
[Mouse] - [Device Settings].
7
Select the device name in [Devices] (e.g., Synaptics TouchPad), then
select [Settings].
15