Panasonic CF-Y2 Series Reference Manual page 73

SD Memory Card Security Function
In the Function fails to Operate Correctly
Reenter the password for confirmation.
When you add the check mark for [Do not check the user name]:
A confirmation message will be displayed.
If you select [Yes], you can register a user name and password on the SD
memory card that is not set in Windows.
In this case, when restarting the computer after completing the settings,
enter the Windows user name and password to log on without using the SD
memory card. After changing the user name and password according to
those set on the SD memory card, you will be able to use it to log on.
Select [OK].
Select [Yes] on the confirmation screen.
A [Private] folder will be created in the SD memory card, and a Windows logon user
name and password will be registered.
Do not delete [Private] folder. Doing so will cancel [Use when logging on to
Windows].
To use both when starting the computer and when logging on to Windows
Add the check mark to both [Use when starting computer] and [Use when logging
on to Windows], and input supervisor password, user password, and other
information according to the instructions on the screen.(
The computer does not respond properly when you insert the SD memory card.
Remove the card and wait a few seconds, then reinsert it. Or, enter each password.
The SD memory card indicator is blinking.
Enter the password through the keyboard without removing the SD memory card.
A software application, etc. may be accessing the SD memory card.
The password input screen and the Windows logon screen does not appear.
If [Leave set] was selected as the setting method:
• If an SD memory card is already inserted when starting the computer, the each screen
does not appear when the computer is started.
73
page 71)