Media Specifications; Table 3 Media Specifications - Microcom 226 User Manual

Printer Specifications
1.3

Media Specifications

Media Types
Maximum Media Thickness
Maximum Media Width
The 426P printer is optimally configured with a fixed tag bracket to assist in the installation
of direct thermal rolled or fanfold tag stock. The printer may use many other types of media
with varying widths using the standard paper line guides.
*NOTE: The printer may print on thicker media types depending on the pliability of the
material, however this requires testing and evaluation. Contact your authorized Microcom
Corporation representative for additional information regarding testing and evaluation of
thicker media types.
**NOTE: The printer's media path has a maximum width of 4.5" while the actual printable
width will vary depending on the print head installed.
4
Continuous, die-cut, preprinted and tag stock either
rolled or fanfold.
.010" (.25mm) * see note below.
4.5" (114.3mm) ** see note below.
Table 3 Media Specifications
Chapter 1
226/426 User's Guide