Front Panel Button; Indicator Light; Table 4 Front Panel Button Description; Table 5 Indicator Light Description - Microcom 226 User Manual

Chapter 3
3.4.1

Front Panel Button

Operation
Printing a
label.
Printer Pause.
Feeding
Labels.
3.4.2

Indicator Light

Light Color
Solid Green.
Solid Amber.
Solid Red.
Flashing
Amber.
Flashing
Red.
Alternating
Green/Amber.
Alternating
Amber/Red.
226/426 User's Guide
A button press while the printer is idle or paused will reprint the
last label or after a cold start, a power up label will print.
Note: If a power up label has not been enabled or if one does not
exist, the printer will print a blank label.
A brief-button press while printing will cause the printer to pause.
Note: Press the button again to continue printing.
Hold the button down while the printer is idle to feed labels. The
printer will continue feeding labels until the button is released.
Table 4 Front Panel Button Description
Indicates that the power is on, the printer is in a ready state, and
is either in LOCKOUT or BASIC access levels.
Indicates that the printer is busy or is in a tag/tear mode other
than Advance When Idle (3).
Indicates that the printer is either in SERVICE, FACTORY, or
DEVELOPER access levels.
Indicates that the printer is paused.
Indicates an error has occurred. The printer will remain in this
state until the condition is removed.
Note: Refer to Chapter 7: Troubleshooting for helpful hints.
Indicates that the printer is Initializing the RAM memory.
Indicates that the printer is updating or loading a new code
revision to Flash memory.
Table 5 Indicator Light Description
Getting Started
Description
Description
11