Microcom 226 User Manual page 24

Printer Modes
Byte Mode
Responses Text and Verbose Mode Responses
(ASCII Hex)
0x01
0x02
0x03
0x04
0x06
0x10
0x11
0x12
0x13
0x15
0x1C
0x1D
0x20
0x21
0x22
0x30
0x31
0x32
0x40
0x51
0x80
14
>STOCK OUT<
>STOCK OVERADVANCED<
>STOCK JAMMED<
>INCORRECT STOCK<
>OK<
>CUTTER JAMMED<
>CUTTER INOPERATIVE<
>CUTTER WATCHDOG STOPPED
CUTTER<
>CUTTER WATCHDOG
WON'T RESET<
>OPERATION FAILED<
>MISSING LABEL<
>INCOMPLETE FORM<
>CATCH TRAY FULL<
>INPUT 1<
>INPUT 2<
>SCRIPT ERROR<
>INVALID PARAMETER<
>PARSER ERROR<
>COMM ERROR<
>FLASH ERROR<
>RESTARTED<
Chapter 4
Definition
Out of Media
Excess media past LPD
preventing a TOF operation.
Media is jammed.
Problem encountered trying to
realign media.
ACK message used with the
^D726)1 command.
The cutter has jammed.
The cutter is not detected
The software shut the cutter off
for safety issues.
The software cannot reset the
cutter after a stopped condition.
The operation failed to execute
properly.
Generated if more than one die-
cut label has been detected.
A complete script did not print on
a >STOCK OUT< condition.
The PMH has reached its
capacity.
The Input 1 sensor has been
actuated.
The Input 2 sensor has been
actuated.
An error with the script has been
detected.
The printer has detected an
invalid parameter.
An error with the printer's parser
has occurred.
A Communication error has
been detected.
The flash memory has
encountered an error.
The printer has been powered
on or the power has been reset.
226/426 User's Guide