Chapter 6: Maintenance And Adjustments; Maintenance Schedule; Table 8 Recommended Maintenance Schedule - Microcom 226 User Manual

Chapter 6: Maintenance and Adjustments

6.1

Maintenance Schedule

It is important to note that optimum print quality and print head life is achieved by
maintaining a clean printer and print head. A Microcom Corporation approved cleaning kit
(part # 040005-0000) is available. Contact your sales representative for purchasing
information.
AREA
Print head
Drive Roller
Peel Edge
Interior Cleaning
Exterior Cleaning
Table 8
CAUTION: Microcom Corporation will not be held responsible for
damage caused by any non-approved solvent, cleaning material
and/or method and the use of such non-approved materials and/or
methods may void appropriate expressed or implied warranties.
226/426 User's Guide
METHOD
Foam tipped swab, cotton
tipped swab, or thermal
printer cleaning card
dampened with Isopropyl
Alcohol.
See section 6.4
Foam tipped swab, cotton
tipped swab, thermal
printer cleaning card, or
lint-free cloth dampened
with Isopropyl Alcohol
See Section 6.5
Foam tipped swab, cotton
tipped swab, thermal
printer cleaning card, or
lint-free cloth dampened
with Isopropyl Alcohol
See section 6.3
Compressed air, soft-
bristle brush, and/or lint-
free cloth dampened with
Isopropyl Alcohol.
See section 6.3
Lint-free cloth dampened
with a mild, non-abrasive
general purpose cleaner.
See section 6.6
Recommended Maintenance Schedule
INTERVAL
After every roll of media
or every 512 feet of tag
stock or fanfold media.
After every roll of media
or every 512 feet of tag
stock or fanfold media.
As Needed.
As Needed.
As Needed.
33