Output Bin X Sensor Test - Lexmark 13P0150 - C 750dtn Color Laser Printer Service Manual

Output Bin X Sensor Test

Output Expander or High Capacity Output Stacker
To run the Output Bin x Sensor tests:
1.
2.
3.
4.
The following is displayed:
Output Bin x
Once the message displays, you can manually actuate each of the output bin sensors.
For all the sensors except the output level sensor, when the sensor is closed CL displays
and when the sensor is open, OP displays.
If the high capacity output stacker is selected then the following is displayed:
If the 5-Bin mailbox is selected the following is displayed:
3-12
Service Manual
Select Output Bin Tests from the menu.
Select Output Bin Tests - Sensor Tests.
Select Sensor Tests - Output Bin x.
Press Return/Stop to exit the test.
P=OP F=OP NF=CL
P = Pass Thru Sensor
F = Bin Full Sensor (lower part of dual sensor)
NF = Near Full Sensor (upper part of dual sensor)
HC BIN 1
TP=OP, P=OP, F=OP, NF=OP
IP = high capacity output stacker top position sensor
P = high capacity output stacker pass thru sensor
F = high capacity output stacker full sensor
NF = high capacity output stacker near full sensor
<output bin> (output bin displayed on line 1 = output bin 1, output bin2, output
bin3, output bin4 or output bin 5 for the bin selector)
P1 = 5-Bin mailbox first pass thru sensor
P2 = 5-Bin mailbox second pass thru sensor
L = EM 5-Bin x empty
L = NL bin contains media but the bin is not near full or full
L = NF bin is near full
L = FL bin is full
5060-XXX