Lexmark 13P0150 - C 750dtn Color Laser Printer Service Manual page 50

User Primary
Message
Load Staples
2-30
Service Manual
User Secondary Message
5060-XXX
Explanation
This message will be displayed when the Staples
Empty Alarm is activated and one of the following
has occurred:
* There are no staples in the staple unit or the
staple unit is not installed.
This message may be displayed at any of the
following times:
* Prior to printing the first page of a batch of
pages that are to be stapled or during the printing
of a batch of pages that are to be stapled (if the
condition cannot be detected prior to printing the
first page of the batch).
The following actions can be taken while this
message is displayed:
* A new staple cartridge may be installed to clear
this message and start/continue printing the
staple batch
or
* Ignore the Load Staples request for this print job
by pressing Go or Select.
The printer will resume printing, however the print
job for which stapling was selected will not be
stapled or press Menu> or Menu< to access the
Busy/Waiting Menu Group.
The following functions will be available via the
Busy/Waiting Menu:
* Cancel Job
* Reset Printer
* Reset Active Bin
* Check Supply Levels
Note: Menu Lockout does NOT prevent access to
the Busy/Waiting Menu Group.