Lexmark 13P0150 - C 750dtn Color Laser Printer Service Manual page 62

User Primary
Message
81 Engine Code CRC
Failure
82 Waste Toner Bottle
Full
82 Waste Toner Bottle
Missing
82 Waste Bottle Nearly
Full
84 Replace Oiler
84 Oiler Nearly
Exhausted
87 Fuser Missing
2-42
Service Manual
User Secondary Message
5060-XXX
Explanation
This message will be displayed when microcode
is programmed into the engine flash code has
failed a CRC check.
The following action can be taken while this
message is displayed:
* Press Go to clear the message.
The code data will be discarded and must be
resent from the host.
This message will be displayed when the waste
container is full.
The following actions can be taken while this
message is displayed:
* Replace the waste container and press Go.
This message will be displayed when the waste
container is missing.
The following actions can be taken while this
message is displayed:
* Insert the waste container and press Go.
This message will be displayed when the waste
container is nearly full.
The following actions can be taken while this
message is displayed
* Press Go
Nearly Full will be reflected in the Supplies Menu.
This message will displayed when the web oiler is
exhausted or missing. Replace the Web Oiler
Assembly.
This message will be displayed when the Wed
Oiler is nearly exhausted. Press Go to continue
or the Web Oil can be replaced.
This message will be displayed when the engine
has detected that the fuser is missing.
The following actions can be taken while this
message is displayed:
* Turn the printer off and insert the fuser
assembly.