Display Inverter - Dell Studio 1735 Service Manual

2. Remove the display bezel (see
3. Remove the display panel (see
4. Turn the display panel over and place it on a clean surface.
1 tape 2
5. Lift the tape that secures the display cable to the connector on top and disconnect the cable from the connector.
Replacing the Display Panel Cable
1. Reconnect the display cable to the connector on top and secure it with the tape.
2. Replace the display panel (see
3. Replace the display bezel (see
4. Follow the instructions in Replacing the Display
Display Inverter
Removing the Display Inverter
1. Follow the instructions in Display
2. Remove the display bezel (see
3. Disconnect the cables from the connectors on either side of the inverter board.
1 screw 2
4. Remove the screw that secures the inverter board and lift the inverter board off the display assembly.
Replacing the Display Inverter
Display Bezel).
Removing the Display Panel).
display cable
Replacing the Display Panel).
Replacing the Display Bezel).
Assembly.
Assembly.
Display Bezel).
inverter board