Table of Contents
Advertisement
NetVanta 6355 PoE Hardware Installation Guide
Shipments of the NetVanta 6355 PoE include the following items:
•
NetVanta 6355 PoE base unit
•
Quick start guide
•
A detachable power cable with a grounded, three-prong plug
•
Mounting brackets and screws
NetVanta 6355 PoE Front Panel Design
The NetVanta 6355 PoE front panel is shown in
Appendix A on page 43
shows the pinouts for the connectors.
NetVanta 6355 PoE Front Panel Features
10/100Base-T Ethernet Interfaces
The NetVanta 6355 PoE front panel contains 24 10/100Base-T Ethernet interfaces (RJ-45). These
interfaces are consecutively numbered 1 through 24, from left to right, with the numbers screened
directly above each port. Status LEDs for each of these interfaces are located directly over these
numbers.
The NetVanta 6355 PoE also has green and red PoE status LEDs located in the upper-left and
upper-right corners (respectively) of each Ethernet connector.
Gigabit Ethernet Interfaces/SFP Slots
The NetVanta 6355 PoE front panel contains two Gigabit Ethernet interfaces that provide two fixed
RJ-45 connectors and two standard SFP slots for connectivity over fiber. (Use either the RJ-45
connectors or the SFP slots. The fiber slots have precedence.) These interfaces are labeled
and the status LEDs are located above the SFP slots.
Status LEDs
The status LEDs are located to the lower left of RJ-45 port 1. The
NIM/VIM installed in NIM/VIM option
the status of a NIM/VIM installed in NIM/VIM option
LED indicates the unit's status.
61200740E1-34D
Figure
Figure 1. NetVanta 6355 PoE Front Panel Layout
SLOT 1
Copyright © 2011 ADTRAN, Inc.
1.
Table 1 on page 18
describes all of the LEDs, and
SLOT 1
(located on the rear panel). The
SLOT 2
(located on the rear panel). The
Physical Description
NetVanta 6355
and
G1
G2,
LED reflects the status of a
LED reflects
SLOT 2
STAT
17
Advertisement
Table of Contents
