Unit Installation
Installing a CompactFlash Card
The CompactFlash (
CF
) slot supports only the ADTRAN-provided 1 GB CompactFlash card. Follow
these instructions when installing a card.
The CompactFlash card is hot-swappable and can be inserted or removed while power is
applied to the unit.
Step
1
Remove the two screws and the cover from the CF slot on the rear of the unit.
2
Slide the module into the CF slot until the card is firmly seated against the chassis.
3
Replace the CF slot cover.
4
The CompactFlash options will now be available in the GUI and the AOS CLI.
Your NetVanta unit is now ready to be configured and connected to the network. For information on switch
configuration for a specific application, refer to the configuration guides provided on the
Community. For details on the command line interface (CLI), refer to the
other related documents are also available online at http://supportforums.adtran.com.
42
Instructions for Installing a CompactFlash Card
Figure 18. CompactFlash Card Installation
Copyright © 2011 ADTRAN, Inc.
NetVanta 6355 PoE Hardware Installation Guide
Action
AOS Command Reference
ADTRAN Support
Guide. All
61200740E1-34D