Netvanta 4660/5660 Series Front Panel Design; Figure 1. Netvanta 4660/5660 Series Front Panel Layout - ADTRAN 17004660F1/F3 Hardware Installation Manual

NetVanta 4660/5660 Series
NetVanta 4660/5660 Series Domestic Shipping Contents
Domestic shipments of the NetVanta 4660/5660 Series include the following items:
• NetVanta 4660/5660 base unit
• Set of two 19-inch rack mounting brackets
• Set of 4 rubber mounting feet
• Six mounting screws
• Quick start guide
NetVanta 4660/5660 Series International Shipping Contents
International shipments of the NetVanta 4660/5660 Series include the following items:
• NetVanta 4660/5660 base unit
• Set of two ETSI/23-inch rack mounting brackets
• Set of 4 rubber mounting feet
• Six mounting screws
• Quick start guide

NetVanta 4660/5660 Series Front Panel Design

The NetVanta 4660/5660 Series front panel is shown below along with a description of all connectors
and interfaces.
NetVanta 4660
STAT FAN
1 PPS
GIG 0/1 GIG 0/2
OUT
CONSOLE
48VDC

Figure 1. NetVanta 4660/5660 Series Front Panel Layout

Power Connector
The power connector, labeled
Please refer to Supplying Power to the Unit on page 29
Status LEDs
The LED indicates the unit's status. The
STAT
through
0/1 GIG 0/5
See the Table 1 on page 14
CONSOLE Interface
The interface is an EIA-232 serial port (DCE), which provides for local
CONSOLE
management and configuration (via a DB-9 female connector). See
for the interface pinouts.
CONSOLE
Connection directly to an external modem requires a cross-over cable.
10/100/1000Base-T Ethernet Interfaces
The port consists of one SFP slot for connectivity over fiber. The status LED is
GIG 0/1
located above the interface.
617004660F1-34B
GIG 0/3 GIG 0/4 GIG 0/5
, provides connection for a 48 VDC power source.
48VDC
LEDs reflect the status of the 10/100/1000Base-T Ethernet interfaces.
for LED behaviors.
Copyright © 2019 ADTRAN, Inc.
T4
for connection details.
LED reflects the status of the fan. The
FAN
Physical Description
GIG
Table A-1 on page 31
13