ADTRAN NetVanta 6355 PoE Installation Manual page 19

NetVanta 6355 PoE Hardware Installation Guide
During power outages, the FXS interfaces are connected directly to the FXO interfaces. This feature is
called life line mode, and allows customers to make analog calls even when the power is out.
For the NetVanta 6355 PoE, devices connected to the FXS (ANALOG STA) ports must
be ACTA/FCC Part 68 compliant due to the direct connection to the public switched
telephone network (PSTN) in life line mode.
MOH
Reserved for future use.
Page
Reserved for future use.
10/100Base-T Ethernet Interface
The Ethernet port (
ETH 0/0
• 10Base-T or 100Base-T with a single connector
• Autonegotiation
• CSMA/CD
• IEEE 802.3 compatibility
Door Relay
Reserved for future use.
CONSOLE Interface
The interface is an EIA-232 serial port (DCE), which provides for local management and
CONSOLE
configuration (via a DB-9 female connector).
Connection directly to an external modem requires a cross-over cable.
Power Connection
The rear panel has a power input to the AC universal power supply. Please refer to
the Unit on page 38
61200740E1-34D
) is an RJ-45 connector. The Ethernet port provides the following:
for connection details.
Copyright © 2011 ADTRAN, Inc.
Physical Description
Supplying Power to
19