Netvanta 6355 Poe Rear Panel Design; Figure 2. Netvanta 6355 Poe Rear Panel Layout; Table 1. Front Panel Led Descriptions - ADTRAN NetVanta 6355 PoE Installation Manual

Hide thumbs Also See for NetVanta 6355 PoE:
Table of Contents

Advertisement

Physical Description
LED
STAT
Port LEDs
(1 through 24, G1, G2)
SLOT 1/SLOT 2
Power over Ethernet
Status LEDs

NetVanta 6355 PoE Rear Panel Design

The NetVanta 6355 PoE rear panel is shown below. Refer to
CF
NetVanta 6355 PoE Rear Panel Interfaces
CompactFlash
The CompactFlash slot (labeled
The NetVanta 6355 PoE supports only ADTRAN-provided CompactFlash (16 MB to 1 GB) (refer to
the part number on the front cover of this manual).
NIM/VIM Option Slots
The two NIM/VIM option slots (labeled
modules (refer to
Option Modules on page
FXS and FXO Ports
The two FXS interfaces (labeled
ANALOG TRK 0/1
and
18

Table 1. Front Panel LED Descriptions

Color
Off
Unit is not receiving power.
Green (solid)
Power is on and self-test passed.
Green (flashing)
On power up, the STAT LED flashes rapidly for five
seconds, during which time the user may escape to boot
mode from the CONSOLE port.
Red (solid)
Power is on, but the self-test failed or the boot code could
not be booted.
Off
Port is administratively disabled or does not have a
connection.
Green (solid)
Port is enabled and has a connection.
Amber (flashing)
Port has activity (transmit or receive).
Off
No NIM/VIM installed or interface is administratively down.
Green (solid)
NIM/VIM module is up and everything is okay.
Green (flashing)
Port has activity (transmit or receive).
Amber (solid)
NIM/VIM module is in test.
Red (solid)
An alarm is occurring on the interface.
Green (solid)
Power is being applied (48 V) to the interface.
Red (solid)
Fault is detected on the interface.
SLOT 1
SLOT 2

Figure 2. NetVanta 6355 PoE Rear Panel Layout

CF
) supplies nonvolatile configuration and compressed code storage.
SLOT 1
22).
ANALOG STA 0/1
0/2
) provide FXS and FXO connectivity, respectively.
Copyright © 2011 ADTRAN, Inc.
NetVanta 6355 PoE Hardware Installation Guide
Indication
Appendix A on page 43
MOH
0/1
0/2
0/1
0/2
PAGE
ANALOG STA
ANALOG TRK
and
SLOT 2
) accept a variety of NIM/VIM option
and
0/2
) and two FXO interfaces (labeled
for pinouts.
100-250 VAC
50-60Hz
DOOR
ETH 0/0
CONSOLE
RELAY
NC NO COM
61200740E1-34D

Advertisement

Table of Contents
loading

Table of Contents