To Connect The Digital Probes To The Device Under Test - Agilent Technologies InfiniiVision 4000 X Series User Manual

This chapter describes how to use the digital channels of a Mixed- Signal
Oscilloscope (MSO).
The digital channels are enabled on MSOX4000 X- Series models and
DSOX4000 X- Series models that have the MSO upgrade license installed.

To connect the digital probes to the device under test

1 If necessary, turn off the power supply to the device under test.
Agilent InfiniiVision 4000 X-Series Oscilloscopes
User's Guide
6
Digital Channels
To connect the digital probes to the device under test
Acquiring waveforms using the digital channels
To display digital channels using AutoScale
Interpreting the digital waveform display
To switch all digital channels on or off
To switch groups of channels on or off
To switch a single channel on or off
To change the displayed size of the digital channels
To reposition a digital channel
To change the logic threshold for digital channels
To display digital channels as a bus
Digital channel signal fidelity: Probe impedance and grounding
To replace digital probe leads
s1
129
129
131
132
132
132
132
133
133
134
142
125
137
125