Nth Edge Burst Trigger - Agilent Technologies InfiniiVision 4000 X Series User Manual

10
Triggers

Nth Edge Burst Trigger

The Nth Edge Burst trigger lets you trigger on the Nth edge of a burst that
occurs after an idle time.
Nth Edge Burst trigger set up consists of selecting the source, the slope of
the edge, the idle time, and the number of the edge:
1 Press the [Trigger] key.
2 In the Trigger Menu, press the Trigger softkey; then, turn the Entry knob
3 Press the Source softkey, and turn the Entry knob to select the input
184
to select Nth Edge Burst.
channel source.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide