Digital Channels; To Connect The Digital Probes To The Device Under Test - Agilent Technologies InfiniiVision 3000 User Manual

This chapter describes how to use the digital channels of a Mixed- Signal
Oscilloscope (MSO).
The digital channels are enabled on MSOX3000 X- Series models and
DSOX3000 X- Series models that have the DSOX3MSO upgrade license
installed.

To connect the digital probes to the device under test

1 If necessary, turn off the power supply to the device under test.
Agilent InfiniiVision 3000 X-Series Oscilloscopes
User's Guide
6

Digital Channels

To connect the digital probes to the device under test
Acquiring waveforms using the digital channels
To display digital channels using AutoScale
Interpreting the digital waveform display
To switch all digital channels on or off
To switch groups of channels on or off
To switch a single channel on or off
To change the displayed size of the digital channels
To reposition a digital channel
To change the logic threshold for digital channels
To display digital channels as a bus
Digital channel signal fidelity: Probe impedance and grounding
To replace digital probe leads
s1
107
107
108
110
110
110
109
111
110
112
120
103
115
103