Adaptec Serial Attached SCSI Installation And User Manual page 30

# Export-EsxImageProfile -ImageProfile "ESXi 5.0 Adaptec Series 7H"
-FilePath C:\ESXi5.0-PMC-CustomISO\ESXi5.0-PMC-Sierra-Series-7H.iso
-NoSignatureCheck -ExportToISO
where -FilePath specifies the path to the custom iso image.
7. Burn the custom ISO image to a writable CD.
Note: Use whatever tool you prefer to burn the CD, such as an interactive
(GUI-based) tool or a command line tool.
Remove the CD after you finish burning the image.
8. On the VMware ESXi machine, insert the custom boot CD, then restart your computer.
9. Follow the on-screen instructions to begin the VMware installation.
10. Complete the VMware installation, following the on-screen instructions.
11. Remove the custom boot CD, then reboot your computer.
Proprietary and Confidential to PMC-Sierra, Inc.
Document No.: CDP-00279-01-A Rev. A, Issue:
Serial Attached SCSI Host Bus Adapters Installation and User's Guide
30