Adaptec AHA-1510A Installation Manual
  1. Manuals
  2. Brands
  3. Adaptec Manuals
  4. Adapter
  5. AHA-1510A Series
  6. Installation manual

Adaptec AHA-1510A Installation Manual

At-to-scsi host adapter
Hide thumbs Also See for AHA-1510A:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
AHA-1510A
AT-to-SCSI Host Adapter

Installation Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AHA-1510A and is the answer not in the manual?

Questions and answers

Related Manuals for Adaptec AHA-1510A

Summary of Contents for Adaptec AHA-1510A

  • Page 1: Installation Guide

    AHA-1510A AT-to-SCSI Host Adapter Installation Guide...

  • Page 2: Hardware Installation

    Interrupt Channel AT Port Address Data Transfer Mode These values are set by the aspi2dos software driver, provided with Adaptec EZ-SCSI or the ASW-1210, and by command line options in the config.sys file (see Software Installation). Installing the Host Adapter Turn OFF and disconnect power to the system and ex- ternal equipment.
  • Page 3 IRQ 11 (pin pair I1) you must also change the /q option when you install aspi2dos (see Software Installation). If another Adaptec SCSI host adapter is already installed in your computer, change the interrupt of the AHA-1510A to something other than IRQ11.

  • Page 4: Setting Termination

    Setting Termination The SCSI bus must be terminated correctly to ensure proper operation of the AHA-1510A host adapter. Terminators must be installed in the first and last physical devices on the SCSI cable and removed from all other SCSI devices. The three...

  • Page 5: Software Installation

    If a hard disk drive is attached to the AHA-1510A, you must use the aspidisk driver to access the disk. You must use the afdisk utility to format and parti-...
  • Page 6 This saves any changes made and gives you access to the newly installed disk(s) or partitions(s). The new partitions will be installed with the aspidisk driver. Other Operating Systems Adaptec also provides software support for ® ® ® NetWare...

  • Page 7: Adaptec Customer Support

    You can reach the BBS 23 hours a day at 408-945-7727; 1200/2400/9600 baud, 8 data bits, 1 stop bit, no parity. You can reach the Adaptec Technical Support Hot Line at 800-959-SCSI (7274), or 408-945-2550. M-Th: 6:00 a.m. to 5:00 p.m. PST F: 6:00 a.m.

  • Page 8: Fcc Compliance Statement

    Each AHA-1510A host adapter is equipped with an FCC compli- ance label which shows only the FCC identification number. The full text of the associated label follows: This device complies with part 15 of the FCC rules.

This manual is also suitable for:

Aha-1510a - storage controller fast scsi 10 mbps

Table of Contents