Packet Statistics - TP-Link TL-SG2424P User Manual

Configuration Procedure:
Step Operation
1 Configure IP-Range
2 Configure multicast filter
rules for ports

8.4 Packet Statistics

On this page you can view the multicast data traffic on each port of the switch, which facilitates you
to monitor the IGMP messages in the network.
Choose the menu Multicast→Packet Statistics to load the following page.
The following entries are displayed on this screen:
Auto Refresh

Auto Refresh:
Refresh Period:
Description
Required. Configure
Multicast→Multicast Filter→IP-Range page.
Optional. Configure multicast filter rules for ports on
Multicast→Multicast Filter→Port Filter page.
Figure 8-12 Packet Statistics
Select Enable/Disable auto refresh feature.
Enter the time from 3 to 300 in seconds to specify the auto refresh
period.
98
IP-Range to be filtered on