TP-Link TL-SG2424P User Manual page 51

The following entries are displayed on this screen:
Auto Refresh

Auto Refresh:
Refresh Rate:
Statistics

Port:
Received:
Sent:
Broadcast:
Multicast:
Unicast:
Alignment Errors:
Figure 5-11 Traffic Statistics
Allows you to Enable/Disable refreshing the Traffic Summary
automatically.
Enter a value in seconds to specify the refresh interval.
Enter a port number and click the Select button to view the traffic
statistics of the corresponding port.
Displays the details of the packets received on the port.
Displays the details of the packets transmitted on the port.
Displays the number of good broadcast packets received or
transmitted on the port. The error frames are not counted in.
Displays the number of good multicast packets received or
transmitted on the port. The error frames are not counted in.
Displays the number of good unicast packets received or
transmitted on the port. The error frames are not counted in.
Displays the number of the received packets that have a bad
Frame Check Sequence (FCS) with a non-integral octet
43