Global Config; Port Config - TP-Link TL-SG2424P User Manual

Note:
Don't transmit voice stream together with other business packets in the voice VLAN except for
some special requirements.
The Voice VLAN function can be implemented on Global Config, Port Config and OUI Config
pages.

9.3.1 Global Config

On this page, you can configure the global parameters of the voice VLAN, including VLAN ID,
aging time, the transmission priority of the voice packets and so on.
Choose the menu QoS→Voice VLAN→Global Config to load the following page.
The following entries are displayed on this screen:
Global Config

Voice VLAN:
VLAN ID:
Aging Time:
Priority:

9.3.2 Port Config

Before the voice VLAN function is enabled, the parameters of the ports in the voice VLAN should
be configured on this page.
Choose the menu QoS→Voice VLAN→Port Config to load the following page.
Figure 9-12 Global Configuration
Select Enable/Disable Voice VLAN function.
Enter the VLAN ID of the voice VLAN.
Specifies the living time of the member port in auto mode after the
OUI address is aging out.
Select the priority of the port when sending voice data.
112