TP-Link TL-SG2424P User Manual page 48

aggregation group. In an aggregation group, the port with smaller port priority will be considered
as the preferred one. If the two port priorities are equal, the port with smaller port number is
preferred. After an aggregation group is established, the selected ports can be aggregated
together as one port to transmit packets.
On this page, you can configure the LACP feature of the switch.
Choose the menu Switching→LAG→LACP Config to load the following page.
The following entries are displayed on this screen:
Global Config

System Priority:
LACP Config

Port Select:
Select:
Figure 5-9 LACP Config
Specify the system priority for the switch. The system priority and
MAC address constitute the system identification (ID). A lower system
priority value indicates a higher system priority. When exchanging
information between systems, the system with higher priority
determines which link aggregation a link belongs to, and the system
with lower priority adds the proper links to the link aggregation
according to the selection of its partner.
Click the Select button to quick-select the corresponding port based
on the port number you entered.
Select the desired port for LACP configuration. It is multi-optional.
40