2
Configure ports
3
Enable
Snooping function
4
Enable
VLAN
5
Check
VLAN
8.2 Multicast IP
In a network, receivers can join different multicast groups appropriate to their needs. The switch
forwards multicast streams based on multicast address table. The Multicast IP can be
implemented on Multicast IP Table and Static Multicast IP page.
8.2.1 Multicast IP Table
On this page you can view the multicast IP table on the switch.
Choose the menu Multicast→Multicast IP→Multicast IP Table to load the following page.
The following entries are displayed on this screen:
Search Option
Multicast IP:
On VLAN→802.1Q VLAN function pages.
For port 3, configure its link type as GENERAL and its egress
rule as TAG, and add it to VLAN3, VLAN4 and VLAN5.
For port 4, configure its link type as GENERAL and its egress
rule as UNTAG, and add it to VLAN3 and VLAN 4.
For port 5, configure its link type as GENERAL and its egress
rule as UNTAG, and add it to VLAN3 and VLAN 5.
IGMP
Enable IGMP Snooping function globally on Multicast→IGMP
Snooping→Snooping Config page. Enable IGMP Snooping
function for port3, port4 and port 5 on Multicast→IGMP
Snooping→Port Config page.
Multicast
Enable Multicast VLAN, configure the VLAN ID of a multicast
VLAN as 3 and keep the other parameters as default on
Multicast→IGMP Snooping→Multicast VLAN page.
Multicast
3-5 and Multicast VLAN 3 will be displayed in the IGMP
Snooping Status table on the Multicast→IGMP Snooping→
Snooping Config page.
Figure 8-8 Multicast IP Table
Enter the multicast IP address the desired entry must carry.
93