Dscp Priority - TP-Link TL-SG2424P User Manual

Configuration Procedure:
Step Operation
1 Select the port priority
2 Configure the mapping relation
between the 802.1P priority
and TC
3 Select a schedule mode

9.1.2 DSCP Priority

On this page you can configure DSCP priority. DSCP (DiffServ Code Point) is a new definition to IP
ToS field given by IEEE. This field is used to divide IP datagram into 64 priorities. When DSCP
Priority is enabled, IP datagram are mapped to different priority levels based on DSCP priority
mode; non-IP datagram with 802.1Q tag are mapped to different priority levels based on 802.1P
priority mode which is enabled by default; the untagged non-IP datagram are mapped based on port
priority mode.
Choose the menu QoS→DiffServ→DSCP Priority to load the following page.
Description
Required. On QoS→DiffServ→Port Priority page,
configure the port priority.
Required. On QoS→DiffServ→802.1P/CoS mapping
page, configure the mapping relation between the
802.1P priority and TC.
Required. On QoS→DiffServ→Schedule Mode page,
select a schedule mode.
Figure 9-7 DSCP Priority
104